Frequently Asked Question

USB Scheduling
Last Updated 2 years ago

USB Scheduling SetUp

1. On the remote, press home, select “General settings”, “Scheduling

image

2. press OK Select “Schedule 1” and set the “Status” ON

image
3. Select “Source”, ”USB PlayList

image

4. Select “ON time” and choose at what time the monitor will turn on and start this sheduled operation

image

5. Select “Off time” and choose at what time the monitor will turn itself OFF

image

6. Select “Repeat modes” and choose on wich days this operation will be performed

image

7. Select “Playlist settings” and press OK

image

8. In this menu, you can browse the folder of your USB stick, once you have found the file you want to play, press OK to add to the playlist (you can add multiple files). When you have done press the RED button on the remote to open the option menu e select “Save List”. Then press the BLUE button on the remote to exit this menu.

image

9. If you added any images to your playlist, choose the “Slideshow duration”, if there are no images you can let it to 10s

image

10. The scheduling configuration is complete, if you select "Resume" and press ok the playlist will start.

IMPORTANT

To be sure that your scheduled operations will start and end at the right time, check the time and date setting: press home, “General settings”, “Clock

image

Check “Date

image

And “Time

image

Check also the “ECO Mode” option, it must be set to normal or the monitor will not turn on. Press home,”General settings”, “ECO Mode

image

If the ECO mode option is not there, exit the menu and press UP – DOWN – LEFT – RIGHT – OK on the remote, now the option is active.

Please Wait!

Please wait... it will take a second!